SORTING

Multi-separator– Type: SSE

Small but separates like a pro!

The multi-separator from SCHUMA is used for sorting sprues directly at the injection moulding machine or after a conveyor system. Sorting is done according to the di erence in height between sprue and moulding. The mouldings are removed at the side using a screw roller. Depending on the require- ment, we manufacture the SSE for you in a left or right-hand discharge direction. The separating gap can be in nitely ad- justed without tools in a few seconds. The SSE can therefore be used with di erent parts to be separated. Thanks to the option of in nitely adjusting the height by means of adjustable telescopic feet, the height is freely selectable as required. Loosening spikes built into the screw prevent parts from getting stuck or jammed during the separating process.

Technische Daten
Separating gap
3 – 110 mm
Electrical connection
230V / 50Hz
Motor
Planetary gear motor
Loosening spike
3/4/5
Plug
Schuko
Height
approx. 570 – 970 mm
Width
500, 600 oder 700 mm
Length
approx. 390 mm
Speed
constant / variable
Flight depth of the screws
standard 3 – 6/8/11 when required
Paintwork
Black (RAL 9005) or Light grey (RAL 7035)

Simple adjustment of the separating gap.

Motor with speed control.

In nitely variable height adjustment.